7
1.
After selecting a mounting surface, either remove the panel if possible or tape off the
area to be drilled with masking tape in order to protect the surroundings.
2.
For the ACA400 Camera, we include a 22mm hole saw. Use this drill bit to drill
through your mounting surface for the camera. Make sure that there is not a metal lip
or double metal in this area as it could damage the hole saw blade.
3.
For the ACA500 Camera use a 5/16” drill bit to create your hole to mount the
camera.
4.
After drilling carefully remove any burs or sharp edges so you do not damage the
cable when pulling it through. Coat the edge of the hole with rust preventative. On
the ACA400 remove the backing on the double sided tape on the top of the camera
base before inserting into the mounting location.
5.
Carefully route the camera cable connector through the hole and insert the camera
into the hole.
