Assistent 100 – Mark 2
integrated tube amplifier_ ___________
REMOTE CONTROL
In case the remote doesn`t work or you replace the battery, please follow the
instructions:
- Make sure that the batteries are fitting tight at their place.
- On the back side of the remote through a little hole you can see a blue LED .Located on the PC
board of the remote.
- Now press at the same time the volume up and down button together, untill the LED flashes, then
stop doing so.
- If it flashes 1 time, the remote is for the
CONDUCTOR
- 2 times for the
EKLIPSE
- and 3 times for the
ASSISTENT 50 and 100
.
- You can change the program of the remote by pressing the buttons of the volume, untill the LED
is flashing as much as you need to be the correct program.
Summary of Contents for ASSISTENT 100 Mark 2
Page 1: ......
Page 18: ...Assistent 100 Mark 2 integrated tube amplifier_ ___________...
