AUDIOTRAK Prodigy
HD2
2. DirectWIRE Control Panel
Click on DirectWIRE on the Prodigy HD2 control panel. The DirectWIRE panel window as shown
below will appear.
a) the
INPUT
column is a new feature of DirectWIRE 3.0. It's used to route signals from the card's
hardware inputs. On Prodigy HD2, the inputs 1 to 8 are identical to the left and right channels of the
analog input signal.
b) the
MME
column represents general application's I/O, for example from programs like
WinAmp, WaveLab (non ASIO mode) or Audition.
c) the
WDM
column represents Multi-MME application’s I/O, for example from programs like
SONAR (WDM/KS mode), PowerDVD, WinDVD, etc.
d) the
ASIO
column represents ASIO application’s I/O, for example from programs like Cubase,
Logic, Reason, Nuendo, SONAR (in ASIO mode) or Samplitude.
e) the
GSIF
column represents GSIF applications like GigaStudio.
f) the numbers in the column on the left represent the number of each input or output port. You can
patch the virtual cables from one point to another by draging your mouse.
3. DirectWIRE Examples
Note:
Please set up DirectWIRE first before starting your audio applications.
1) recording of a stereo mix for internet broadcasting with WinAMP
15
