The 8-step LFO sequence | Step
This page is slightly different from the others:
>>> +8 0 +25 +51 len
-5 -59 +44 +53 8
To program a sequence:
•
Use encoder 1 to select the 4 active steps to be edited (marked with >>>)
•
Encoder 2 to 5 will set the 4 active step values.
•
Encoder 6 sets the length of the sequence.
Remember that, to be active, one (or several) LFO(s) shape must be set to ‘stp’ for the sequence to
have an effect.
And you also need to set a modulation destination amount different from 0 for this LFO in the
matrix too to hear the effect of the sequence on the sound.
Audiothingies Micromonsta user manual
21
