NRPN support
Full NRPN control is available, documentation will be released separately when ready.
Microtuning
Micromonsta 2 can be retuned globally by sending a Bulk Tuning Dump via MIDI.
Bulk Tuning Dump format
A bulk tuning dump has the following format:
F0 7E <device ID> 08 01 tt <tuning name> [xx yy zz] ... chksum F7, where:
•
<device ID> is 0x00 or 0x7F (all devices)
•
tt is tuning program number (not used, set to 0x00)
•
<tuning name> is 16 ASCII characters (not used, set it to “NotUsedButNeeded” for example)
•
[xx yy zz] is the frequency data for one note (repeated 128 times)
•
chksum is the calculated checksum (not used)
Limitations
Bulk Tuning Dumps are global, all the patches will be affected.
They are not stored in Micromonsta 2 memory, this means that each time you power it off, it will lose
your custom tuning, and you will need to send it again for the working session.
Audiothingies MicroMonsta 2 user manual v2.1
35
