Quick start
1. Connect audio outs to a mix table, turn the volume knob fully clockwise.
2. Connect a MIDI keyboard / sequencer into the DIN MIDI Input.
3. Power the DoubleDrummer with a 9V DC, center positive, 2.1mm plug PSU
1. Play C1 on MIDI channel 1, you should hear the bass drum playing
The other notes triggering the different instruments are listed in the MIDI Map section of this
manual
2. Press Load
3. Turn encoder 6 or press encoders 4/5 to navigate thru the patches. Press Load again to load
selected patch, press Home to cancel and return to previously loaded sound.
Audiothingies DoubleDrummer user manual
7
