-------------------------- 2 --------------------------
SPEAKER ON-OFF VOLUME CONTROLS
The ideal position for all speaker controls (Master-Room-Patio) is the fully clock-
wise position. The speakers are fully on at this setting. A setting lower than the 3
o’clock position will result in low level intercom communication even if the inter-
com volume control at the Master Unit is fully on. To turn a speaker off turn the
volume control fully counterclockwise. At the “Off” setting the Room Speaker cannot
be monitored and will not be included in the Room Listening Function. This guar-
antees privacy at each Room Speaker.
STATION TUNING-RADIO ON-OFF
Room and Patio speakers with the optional “ST” (Station Tuning) feature will
have a Push to Tune label on the Volume Control. To turn the radio on, press the
volume control knob and hold for approximately two (2) seconds. To turn the
radio off, press the volume control knob and hold for approximately two (2) sec-
onds. When the radio is on press the control knob and immediately release to
advance the tuner through the radio stations 1-6 in memory previously selected.
See RADIO STATION MEMORY (1-6).
INTERCOM VOLUME CONTROL
This volume control should be adjusted with the Room Speaker at high settings
as described above. Communication and monitoring are most effective when the
Room Speaker volume control is fully on.
TONE CONTROL
This control adjusts the bass-treble tone of any selected program. Turn the con-
trol counterclockwise for more bass, and clockwise for more treble.
RADIO VOLUME CONTROL
This is the main volume control for audio program. It should be adjusted to a
slightly higher than comfort level with the Room Speaker at or near fully on to
your personal comfort.
CHIME VOLUME
The Door Chime volume is adjusted at the factory assuming a near fully on loud-
ness of the Room Speaker volume control. If a different chime volume is desired,
there is a labeled internal volume control on the back of the Master Unit. Remove
the Master Unit from the wall for adjustment with a small screw driver.
-------------------------- 7 --------------------------
RADIO AUTOMATIC ON-OFF (AUTO)
When the Auto button is pressed and immediately released the red LED above
the button will light and the automatic function will become active and remain
indefinitely active 24 hours a day until the Auto button is pressed to cancel the
automatic on and off function. When the auto function is active the radio (AM or
FM) will automatically turn on at the “On” Time setting and in sequence at the
“Off” Time setting. The AM or FM Station that will turn on and off is determined by
whichever broadcast band was selected last. The auto function will not turn any-
thing on or off but the AM and FM Radio.
TAPE PLAYER FUNCTIONS
1. TAPE PLAYER -
When the cassette is inserted, tape play will activate
automatically. The Tape will override Power Off, AM, FM, CD, AUX, and the auto
function. When the end of the tape is reached the tape will switch sides and
automatically play in the opposite direction. The Tape will continue to play until
the cassette is ejected.
2. EJECT -
Press to eject the cassette. When the cassette is ejected the player
will switch to the Power Off mode.
3. PROGRAM INDICATORS -
The LED’s at the left of the eject button indi-
cate which side of the tape is playing (UP side or DOWN side).
4. PROGRAM -
This button will switch the tape to the UP side and DOWN
side.
5. REVERSE -
When the Reverse button is pressed the tape will rewind in the
opposite direction of play until the button is pressed again or the beginning of the
opposite side of play is reached. Play will then resume.
When pressed and held down the tape will fast reverse with an audible “cue”.
Play will resume when the button is released. During both reverse functions the
program indicator opposite the direction of play will flash in half second intervals.
The program indicator in the direction of tape play will remain lighted.
1
2
3
4
5
6
7
8
