AD5012
OWNER’S MANUAL
13970 SW 72nd Ave, Portland, OR 97203 • 503.914.4688 • www.audiosource.net
4
AC Voltage Switch
The unit is set at the factory for 115V U.S. operation; simply connect the
included IEC power cord to your wall outlet. For 230V operation, move the
voltage selector switch to the 230V position. When operating at 230V the
internal fuse located in the IEC socket should also be changed. In most 230V
applications a separate power cord will be required and is not included.
IEC Power Connector
The unit comes with an IEC jack that permits removal of the AC power cord.
This allows the flexibility of changing the power cord for different countries.
The IEC socket also houses the main fuse holder. Plug the power cord
VXSSOLHGZLWKWKHDPSOL¿HULQWRWKHDPSOL¿HUDQGD
wall outlet or appropriate
surge protector.
CAUTION:
DO NO
7SOXJWKHDPSOL¿HU
’s power cord into a switched outlet,
such as what is provided on some Surround Receivers. If you wish to have
WKHDPSOL¿HUWX
rn on when the Receiver is powered up, use one of the power
modes, such as Trigger or Auto.
(Page 3 Con’t)
14.
15.
REMOTE
1
2
3
4
1.
Mute
Press this button to mute the AD5012
output.
2.
Power/Standby
Press this button to bring the AD5012 out
of Standby Mode, or to put the Amplifier
in Standby Mode. If rear panel Power Mode
switch is in Auto mode, this button is non-
functional.
3.
Bus1
/- Controls
Controls the Volume level of BUS 1 the
same way the back panel BUS 1 Level
Control does.
4.
Bus2
/- Controls
Controls the Volume level of BUS 2 the
same way the back panel BUS 2 Level
Control does.
BUS1
BUS2
A Note On Distortion
Digital amplifiers distort differently than conventional Class A/B amplifiers.
If you hear a clicking or popping sound at high volume levels, this is an
indication the AD5012 is distorting. Pushing the amplifier harder than
the distortion level may trigger the amplifier’s protection circuitry which
will turn the output of the amplifier off and engage the red protection LED.
If this occurs, simply turn the channel level down until the distortion no
longer occurs.
Limited Warranty
AudioSource® warrants its amplifier products against defects in materials and workmanship for a limited period of time. For a period of two years from date of
original purchase, we will repair or replace the product at our option, without charge for parts and labor. Customer must pay all parts and labor charges after the
limited warranty period expires. The limited warranty period for factory refurbished products expires after the ninety (90) days from date of original purchase.
This limited warranty applies only to purchases from authorized AudioSource® electronics retailers. This limited warranty is extended only to the original
purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource® dealer when making a claim against this limited
warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting
from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, modification, service by anyone other than AudioSource®, or
damage that is attributable to Acts of God. It does not cover cost of transportation to AudioSource® or damage in transit. The customer should return his defective
product, freight prepaid and insured, to AudioSource® only after receiving a Return Authorization.
This warranty will become void if the serial number identification has been wholly or partially removed, altered or erased. Repair or replacement under the terms
of this warranty does not extend the terms of this warranty. Should a product prove to be defective in workmanship or material, the consumer’s sole remedies will
be repair or replacement as provided under terms of this warranty. Under no circumstances shall AudioSource® be liable for loss or damage, direct, consequen-
tial or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the two following conditions: (1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
