SYSTEM SETUP
OUTPUT MODE:
If the DVD player is connected to the TV through a Video Jack, please set to CVBS.
NOTE: Preference page can only be opened when no disc is playing.
1) If TV type is selected, use the navigation and ENTER buttons to set to PAL, AUTO or NTSC.
(NOTE: The TV system in the US, Canada and Mexico is NTSC).
3) If Parental is selected, use the navigation and ENTER buttons to set the rating level as desired.
- Press the RIGHT navigation button to enter the menu. The rating level list will highlight.
- Press the UP or DOWN navigation button to select the desired level (see below).
- Press the ENTER button and a password window will pop up.
- Enter the 6 digit password (default password is 136900) by using the numeric buttons on the remote.
- Press ENTER to save the settings and exit.
* Rating Levels:
- 1 = (Kid Saf): Kid Safe
- 2 = (G): All Ages
- 3 = (PG): Parental Guidance
- 4 = (PG 13): Parental Guidance under 13 years old
- 5 = (PGR): Parental Guidance suggested under 17 years old
- 6 = (R): Parental Guidance strongly recommended under 17 years old
- 7 = (NC 17): 17 years or above
- 8 = (ADULT): Adult only
4) If Password is selected, press ENTER to enter into the subsetting menu that will appear on the screen.
- If Password is selected, press ENTER twice to enter. The new password setting menu will appear.
- Enter the 6 digit old password. The column for the new password will become highlighted.
- Enter a new 6 digit password. The column for confirm password will become highlighted.
2) If Audio, Subtitle or Disc Menu is selected, use the navigation and ENTER buttons to set the priority of the
available language (This function will depend ont he recording of the DVD).
- If Password Mode is selected, use the navigation and ENTER buttons to set it to On (activate the rating
level setting) or Off (password is needed).
- Enter the new password again. The OK button on the screen will become highlighted. Press the ENTER
button to save the setting and exit.
5) If Default is selected, use the navigation and ENTER buttons to reset all of the settings and restore to the
factory settings. Press the SETUP button to exit without making any changes.
VIDEO SETUP PAGE
PREFERENCE SETUP PAGE
16
