52)
Cut a piece of cabinet damping
foam to 6cm x 6cm and glue it in the
cabinet as pictured.
53)
Place a line of glue around the
baffle rebate.
Also put a thick line on the edge of the
port piece as pictured.
Note: Glue on port edge, NOT on cabinet
bottom edge.
Baffle rebate
Port edge
54)
Press the baffle firmly in the cabinet,
aligned to the top.
Ensure wires for tweeter and woofer go to the
back of the cabinet (ref step 58).
Allow glue to cure at least 30 min.
Do not glue cabinet bottom edge
Note: Do not place directly behind the
woofer as this will block the magnet venting
hole.
