Please note:
Within a channel group, one
SP-100M
must be
defined as a »MASTER«-unit.
A total of two SP-100M can be used within a
channel group at the same time, but only one
can be defined as »MASTER«. Having more than
one active »MASTER«-transmitters within the
same channel group will cause interference in
the sound quality.
2.5 Defining a transmitter as Master
On the powered-up device, press the MUTE-but-
ton for 2 seconds. The symbol »GRP« on the
display will blink. Briefly press the MUTE-button
again. The symbol »ID« will start to blink. Use the
»
« and »
« buttons to change the ID between
»00« and »01«. Selecting »00« will set the device
as Master.
2.6 Input level
The sensitivity of the inputs »MIC« and »AUX«
can be adjusted between »VOL 00« to »VOL 05«
by simply pressing the »
« and »
« buttons at
any time.
16 English
