Bass Line – User’s Manual
7
of tune, especially in the upper range of notes. This
simulates the way old analog synthesizers go out of
tune after warm up.
Activate highpass filter
The highpass filter is fixed to cut bass frequencies.
This is useful in situations where ABL is competing for
bass frequency room with other bass lines.
Configuration
Load MidiCC map
Loads the Midi controller map from MidiCC.ini.
Save MidiCC map
Saves the Midi controller map to MidiCC.ini.
Reload Configuration
Reloads Config.ini and activates the settings.
Registration/Info
About Bass Line
Presents registration and information about the plug-in.
Pattern
The pattern menu is used to alter the current pattern using following functions:
Copy/Paste
Copy
Copies the pattern to the copy buffer.
Paste
Pastes the copy buffer over the current pattern.
Transpose
Tra12
Transposes the pattern up 12 semitones (one octave).
Transpose -12
Transposes the pattern down 12 semitones (one octave).
Tra1
Transposes the pattern up 1 semitone.
Transpose -1
Transposes the pattern down 1 semitone.
Note: An attempt to transpose out of range will set the notes to the highest/lowest pitch
that is possible.
Shift functions
Shift Left
Shifts pattern one step to the left.
Shift Right
Shifts pattern one step to the right.
The shift functions only affect the steps within the pattern length and work circularly.
Transform
All notes off
Sets all notes to rests.
All accents off
Turns off all accents.
All slides off
Turns off all slides.
Randomize
Randomizes everything (pitch, transpose, accent, slide and time
mode).
Import/Export
Import pattern
Import (Freebee) pattern from text format.