-9-
Recommended Ported Enclosure
Remember:
If you are going to bend the port at 90º, you will need to add 1/2 of the ports height
to the length! See below:
Example:
(Fig. 1)
H
port=3”
W
port=10”
L
port=20”
(Fig. 2)
Since
H
port is 3” you need to add 1.5”(1/2 of
H
port) to
L
port. This means that
L1+L2=21.5”.
Always measure L1 and L2 down the center to get an accurate measurement!
Fig. 1
Fig. 2
TXX-BD1-10
TXX-BD1-12
TXX-BD1-15
