Page 3
ENGLISH
X312 - 2-way stereo or 3-way mono active filter
The X312 is a device allowing you to modify the volume and structure of an audio signal. This process can
create distortions that can be harmful to your sound system.
Please make sure the outgoing signal of your X312 is clear, without distortion, and the output level is adapted
to the devices receiving the signal. However, checking the output volume is not enough as a saturated signal
can damage your material or cause hearing impairments.
2 - Our recommendations
The X312 is a powerful tool able to separate an audio signal by frequency range.
It is also able to process a stereo audio signal via 2 separated ways or a mono signal via 3 separated ways while
handling the basses via an independent output.
• XLR balanced inputs and outputs: +4 dB
• Stereo mode (2 ways + subwoofer) or mono mode (3 ways + subwoofer)
•
Stereo mode:
• Incoming signal volume control
• Basses and trebles cutoff frequency settings per side
• Basses and trebles volume control per side
• (Optional) Use the SUB output with gain conrol and cutoff frequency settings
•
Mono mode:
• Incoming signal volume control
• Basses, mediums and trebles cutoff frequency settings per side
• Basses, mediums and trebles volume control per side
• (Optional) Use the SUB output with gain conrol and cutoff frequency settings
3 - Main characteristics
2-way Sub or 3-way mono + Sub active filter - 19" edge-rackable.
4.1 - Checking the contents
The package must contain the following articles:
- The X312
- The user guide
- 1 power cord
4-2 - Installing the unit
a -
Set up the X312 over a flat surface or within racks.
b -
Please make sure the unit is installed in a properly ventilated place, unexposed to sunlight rays, excessive
temperatures or humidity.
4 - Preparation and installation
