![audiophony WALLAMPmedia User Manual Download Page 18](http://html1.mh-extra.com/html/audiophony/wallampmedia/wallampmedia_user-manual_3012208018.webp)
WALLKIT
- WALLAMPmedia set + 2 ceiling speakers
English
Connect a computer via the USB port, install and run the provided configuration
software.
: Provides identification information of the interface and connection status.
: Allows you to specify the Bluetooth identification of the controller as well as the
password for connection. Click on «Configure» to apply the changes.
: Configure the maximum output level. Click on «Configure» to apply the changes.
1
- Standby button
2
- Mode selection button
3
- Mute button
4
- Pre-programmed equalization selection
button
5
- Menu button (not used)
6
- Playback and volume control area
7
- Playback mode selection button
8
- Numerical zone :
- In SD or USB mode you can directly enter
the number of a song.
- In FM mode you can directly enter a frequen-
cy from the FM band. If the entered frequency
is outside the range 0870-1080 the function
will be inoperative.
For example, to obtain the frequency 87.5
MHz you must enter 0875.
7 - Infrared remote control