Page 15
UHF410 series microphones -
UHF Hand, Headband or Lavalier Systems
English
L4
- If you acquire two UHF410-Base
receivers you have the possibility to
couple them to position them in a
19-inch rack.
- Each receiver is delivered with a part
of the necessary screws.
- The coupling frame then allows you to
connect the 2 receivers.
- Please note that in this case you
have the possibility to offset the
antennas on the front panel in the
holes provided for this purpose on the
brackets.
- If the reception is not very good or
you need more range you can use the
signal bosster type UHF410-Boost.
- These can be attached to the
UHF410-Hold which can be screwed
onto the boom of a microphone stand.
- For an optimum range an antenna
splitter (UHF410-Split) is connected to
the receiver and then to a directional
antenna (UHF410-Ant) equipped with
an integrated signal booster.
7 - Use of accessories
UHF410-Boost
Antenne
UHF410-Hold
UHF410-Rall
UHF410-Split
UHF410-Ant
