Page 6
Français
TT-2930 - Platine disques high-torque direct avec cellule
21
22
23
24
15
16
17
18
19
20
25
15 - Headshell
It is used to connect your cartridge with the tonearm.
16 - Headshell locking nut
After attaching the headshell to the tonearm, this locking
nut will securely hold the headshell to the tonearm.
17 - S-shaped tonearm
18 - Tonearm assembly height adjust
Raises and lowers the entire tonearm assembly to allow
the tonearm to remain parallel to the record surface.
19 - Tonearm lift
This elevates the tone arm above the record surface.
20 - Tonearm clamp and rest
Use this rest for the tone arm and clamp it in position
during transportation.
21 - Tonearm lever
Controls the up and down action of the tone arm lift.
22 - Anti-Skate Control
Applies a small inward force to the tonearm, counteracting
the tendency of the tonearm to move outward due to
forces created by the stylus in the record groove.
23 - Tonearm assembly height lock
Locks the tonearm height setting attempting to make a
height adjustment.
24 - Counterweight
Balances the tone arm and provides adjustment for
proper downward tracking force on the stylus.
25 - Phono output
This is the standard analog output (RCA jacks), which
can be connected to phono input on any DJ mixer.