audiophony Nova Series User Manual Download Page 4

Page  4

English

NOVA-10A/12A/15A

 - 10/12/15 inches 2-way amplified speakers with bass reflex

3 - Technical specifications and features

2 - Introduction

The NOVA-10A, NOVA-12A and NOVA-15A speakers are the ideal solutions for live performances.
They deliver an astonishing power of 200W for the NOVA-10A, 350W for the NOVA-12A and 350W for the 
NOVA-15A. This powerful output is perfectly clear, warm and deep, adapted to vocal, live or recorded sessions.
They are easy to install, light and compact: that's the best you can find for nomad installations without any 
compromise on quality, power or possibilities.

NOVA-10A

NOVA-12A

NOVA-15A

Bi-amplification

150W RMS Class D for LF
50W RMS Class AB for HF

300W RMS Class D for LF
50W RMS Class AB for HF

300W RMS Class D for LF
50W RMS Class AB for HF

Total power output

200W RMS / 800W dynamic

350W RMS / 1400W dynamic 

350W RMS / 1400W dynamic

Frequency response

60 Hz - 20 KHz

55 Hz - 20 KHz

50 Hz - 20 KHz

Power supply unit

SMPS

H x V Dispersion

120° x 60°

Sound Pressure Level

120 dB max.

121 dB max.

122 dB max.

Woofer

10"
2" coil
4 Ohms - 170W RMS

12"
2" coil
4 Ohms - 350W RMS

15"
3" coil
4 Ohms - 350W RMS

Tweeter

1" driver
8 Ohms
50 W RMS

1'' driver
8 Ohms
50 W RMS

Inputs

2 XLR and JACK MIC/LINE inputs
1 mini Jack AUX input and BLU TWS

Output

1 XLR line output

Settings

Volume settings for each zone
HIGH/LOW +/- 12 dB main volume settings

DSP

4 presets available: Standard, Vocal Boost, Live, Stage monitor

Protection

Short-circuit, thermal and limiter

Housing and fixation system

2 monitor-specific angles
1 top handle and 2 side handles
2 M8 rigging points (below)
2 M8 rigging points (on top)
36mm mounting plate for a speaker 
stand

2 monitor-specific angles
1 top handle and 2 side handles
2 M10 rigging points (below)
2 M10 rigging points (on top)
36mm mounting plate for a speaker 
stand

2 monitor-specific angles
1 top handle and 2 side handles
2 M10 rigging points (below)
2 M10 rigging points (on top)
1 M10 rigging points (rear)
36mm mounting plate for a speaker 
stand

Dimensions

390 x 360 x 565 mm

445 x 415 x 680 mm

520 x 470 x 775 mm

Net weight

10,75 Kg

15,65 Kg

19,6 Kg

Summary of Contents for Nova Series









Reviews: