MOJO500Liberty
- Active battery system - Subwoofer and column with Bluetooth
®
and Reverbe
Page 5
English
1- Power input socket
Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in
amplifier.
2 - Fuse
Protects the power supply module and the built-in amplifier.
If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.
3 - Power switch
4 -
Balanced line output
Output for link another system. The level is line and signal is master mixed.
5 - Input connectors
CH1 and CH2 input via balanced COMBO
Connect here an XLR or JACK plug from a line level music instrument, a microphone or a guitar. The signal of this
mono input is spread across the right and left output of the system.
CH3/4 and CH5/6 inputs on 6.35 mono jack
On these entries you can either:
- Connecting line level devices
- Connect guitars if the CH3-6 Hz button (15) is pressed.
CH7/8 inputs via RCA, stereo 3,5 Jack and Bluetooth
®
Connect a line level instrument via the RCA. The AUX input allows you to connect via stereo Jack 3.5 any extra line
level source as external player. The Bluetooth
®
receiver is also on this channel.
6 - Channels 1 and 2 input selector
Allows you to choose the type of source connected to each channel.
7
-
Channels sound level
Allows you to adjust the sound level of each channel.
This setting also affects the main volume level of the amplification system.
(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).
8 - Reverb level adjustment for channels 1 to 6
9 - Assignment of the reverb to channels 1 to 6
10 - Low equalizer
Allows you to equalize (+/- 15dB) the channels 1 to 6 Low signal.
11 - High equalizer
Allows you to equalize (+/- 15dB) the channels 1 to 6 Low signal.
12 - Aux/Bt selector
This switch allows you to select either Bluetooth or Aux and RCA inputs to assign to channels 7 and 8.
13 - ON/LIMIT signal indicator
Allows you to check on the volumes
(PLEASE MAKE SURE EACH CHANNEL IS CONFIGURED IN ORDER TO PREVENT THIS INDICATOR FROM BEING
LIT).
CAUTION
Please make sure to properly configure the sound levels of your system. In addition to being unpleasant
for the audience, improper settings can damage your whole sound system.
The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently
lit.
Beyond this maximul level, the volume will not increase but will be distorted.
Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.
First, in order to prevent that, adjust the sound level via the Level of each channel.
Then, use the High/Low equalizer to adjust the acoustic as you wish.
If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in
order to spread the sound output evenly.
