ENGLISH
SELF-POWERED SOUND SYSTEM WITH USB READER AND UHF MIC
Page 8
Power management indicators:
1 -
BL indicator: Battery level indicator. This red indicator
flashes when the battery needs to be charged.
This red indicator stays lit when the battery is charged
enough.
2 -
CG indicator: Indicates the charging status. This green
indicator flashes during the charging process.
This green indicator remains lit when the charging process
is complete.
3 -
DC input: allows you to connect an external power supply unit in direct current (19V 3.15A). Please keep the
same polarity (+ in the middle).
Note about the battery:
Please use the original battery. If need to replace the battery, use a model with the same characteristics.
Please charge the battery before using it for the first time. The JOGGER50 is designed to charge one battery
at a time.
In order to preserve the battery, turn the device off when you are not using it.
The battery can be severely damaged if it is totally emptied by an inactive system.
Moreover, the battery must be regularly recharged to prevent it from drying.
The battery is considered a wearing part and is not covered by the warranty.
1 -
Turn off your JOGGER50.
2 -
Open the rear access hatch as described on Figure 1.
3 -
Remove the used battery by pulling the strip.
4 -
Install the new battery in its compartment as
described on Figure 2.
5 -
Make sure the battery is in position and close the
hatch.
Notes:
-
Caution: Please make sure to position the battery
properly, as described on Figure 1, as your device can
be damaged by an improper positioning.
- A new battery must be fully recharged before being
used. The green indicator flashes during the charging
process and remains lit once the battery is
fully charged.
5 - Power management
Lithium-ion battery
Figure 2
BL CG
MAIN
VOL.
MAX
OFF
ON
T
ONE
L
H
DC
IN
1
9V/3.
1
5A
AUX
IN
MIX
OU
T
Green LED
Red LED
6 - Replacing the battery
Opening the battery
access hatch
Figure 1
