audiophony COMPACT500 User Manual Download Page 7

COMPACT500 - Amplified system with subwoofer and satellites -500W

Page 7

English

3.3 - Satellites:

1 2

3

4

Satellite of the COMPACT system:

1 - Female audio contact slot
2 - Jack 6.35 In
3 - Male audio contact slot
4 - M6 insert

 

The satellites were designed to be 
operated with this subwoofer.
Please do not use any other type of 
satellites as it may damage the whole 
sound system.

CAUTION

4 - Setting up the sattelites

The COMPACT 500 satellites can be equipped with an accessory featuring a 18mm 
baseplate to mount them on a compatible  speaker stand, as described on the drawing 
opposite.

Please respect the following safety precautions when using speaker 
stands:

- When using speakers stands outdoors, please make sure the stands are 
secured, even perhaps guyed, in order to prevent any risk of fall.
- If the speaker stands are in a crowded area, make sure to prevent the 
audience from accessing them.
- When mounting the stands, make sure to spread the tripod as much as 
possible to stabilise the stand.
- Please make sure to install your stands on a flat, even surface.
- Tighten the clamping knobs properly before turning the speakers on.

WARNING

4.1 - Using a speaker stand

4.2 - Setting up two satellites together

The COMPACT500 satellites are equipped with male and female contact slots 
allowing them to be daisy-chained.
This slot guarantees the transmission of the audio signal between the two 
satellites and the mechanical connection.
The opposite drawing describes how to connect two satellites.

Summary of Contents for COMPACT500













Reviews: