RASP
TOUCH
Mount the on/off button [M3]. To do this, simply remove the bolt, push it through
the hole from the inner side [F4] of the casing and screw the bolt back.
Mount the on/off button [M3]. To do this, simply remove the bolt, push it through
the hole from the inner side [F4] of the casing and screw the bolt back.
Lay your SBC without screwing it for now. Just watch where the processor chip will
be located on the plate and stick the thermal paste at the same place.
Use [S1] plate and [V2] screw to improve dissipation.
