Continuous sealer
D541
Safety
11
•
Do not switch the sealer back on until the malfunction has been repaired.
•
Should any liquid or foreign object enter the machine, switch off the sealer
and immediately remove the plug from the wallsocket and have the sealer
checked by maintenance personnel before using it again.
•
Should an unusual event occur, such as the development of smoke, remove
the plug from the socket immediately and have the sealer checked by
maintenance personnel before using it again.
•
Remove the plug from the socket before carrying out any maintenance work.
•
Never open the sealer's housing while it is connected to the mains power.
•
Do not use any water, abrasive cleaning agents, chemical solvents or other
liquids when cleaning the sealer.
2.3.2 What to do in case of fire
NEVER use water to extinguish a fire. This may result in life-
threatening situations because the sealer may be live.
Should the sealer catch fire, never use water to extinguish the fire. Because the
sealer is live, this may result in life-threatening situations. A fire extinguisher must
be within reach when the sealer is in use. The following types of fire extinguishers
are suitable to extinguish a burning sealer:
•
Powder extinguisher.
•
Foam extinguisher.
