10 - CONNECTING EXTERNAL HARDWARE
The DB25 connector can be used to interface the QCBOX Model 5 with external
hardware, the connection are as showed in the following figure:
If you connect the unit to external signals be sure to use TTL logic levels.
11 - CONNECTING A FOOT PEDAL SWITCH
It is possible to connect an external foot pedal switch to the
PEDAL IN
input on the
rear panel of the QCBox Model 5.
This will trigger QC operations as described in chapter 14 of the CLIO User's Manual.
12 - RACK MOUNT ASSEMBLY
Using the Rack QC panel it is possible to assemble the QCBOX Model 5 together the
FW-01 Audio Interface or the SC-02 Signal Conditioner so that they can be mounted
in a standard 19” rack frame.
21
