34
Settings
5 Set the first digit for your area code using the
Up key
▲
or the
Down
key
▼
.
6 Press the
Set key
to confirm.
7 Use the same method to set the following digits. After each setting press
the
Set key
to confirm.
If you don’t want to do further settings, the phone
will return to idle state after approx. 12 seconds.
Setting the LCode (Call-by-Call provider)
You can enter e. g. the telephone number (prefix) of a call-by-call
provider. This telephone number will be automatically dialled in front
of a calls list entry in case you call back from the list (see page 44), if
you press the
redial key
twice instead of lifting the receiver or pressing
the handsfree button.
1 The receiver is placed on the base.
2 Press the
Set key
.
3 Press the
Up key
▲
twice.
The display shows
3 0
.
4 Press the
Set key
, the current setting is shown.
5 If necessary delete the digits using the
Delete key
and enter the correct
code using the digit keys.
6 Press the
Set key
to confirm.
Setting the LCD contrast
1 The receiver is placed on the base.
2 Press the
Set key
.
3 Press the
Up key
▲
three times.
The display shows
.
Summary of Contents for TEL136
Page 1: ...Telefon Telephone Bedienungsanleitung Operating Instructions TEL136 ...
Page 2: ......
Page 55: ......