4
AUDIOLINE TAM838 USING THE ANSWERING SYSTEM
VOLUME CONTROL
#
Press the
•
–
buttons to increase/decrease volume.
LISTENING TO YOUR MESSAGES
#
The display flashes to show how many new messages have been received. If no new
messages have been received the display shows total messages (old).
#
Press
[PLAY/PAUSE]
to listen to your new messages (when NEW messages have
been played, press
[PLAY/PAUSE]
again to play all messages).
#
You have the following options during playback:
Press
[SKIP]
to skip current message.
Press
[REPEAT]
to replay current message.
Press and hold
[REPEAT]
for 1 second to play previous message.
Press
[DELETE]
to erase current message. (See Warning below.)
To pause playback press
[PLAY/PAUSE]
(“P” will show in the display, after 7
seconds the unit will revert back to standby mode), to continue press
[PLAY]
again.
To erase all messages after playback, press and hold
[DELETE]
until unit
beeps.
Warning: Deleted messages CANNOT be retrieved
.
NOTE:
If the display shows “--” either the OGM is missing or the day/time has
not been set.
CALL SCREENING
#
With the unit switched on, incoming messages can be heard before deciding
whether to answer calls. Adjust the volume setting using the
•
–
buttons.
#
To turn the speaker down, repeatedly press the
–
volume button.
#
To turn the speaker up, repeatedly press the
•
volume button.
INTERCEPTING MESSAGES
#
If, while listening to a message being recorded you decide to answer a call, lift the
handset on a telephone connected to the same telephone line.
#
If recording continues, press
[STOP]
on the
TAM838
, or
“
t
”
on the tone
dialling telephone you are using.
