9
Putting the Telephone into Operation
24
Connecting the charging station
1
Connect the charging station as
illustrated in the diagram. For
safety reasons, only use the
power adapter plug supplied.
Inserting the batteries
Insert the batteries in the open battery
compartment. Only use batteries of
the type AAA NiMH 1,2 V.
Pay attention to correct polarity.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the
base/charging station for
at least
24 hours.
When the handset is inserted in the base/charging station properly,
you will hear an acoustic confirmation signal and the charge control
lamp lights up. The handset warms up during the charging process.
This is normal and does not represent a risk. Do not charge the
handset with charging units from other manufacturers. The current
battery charge status
is indicated in the display:
Full
Half empty
Low
Empty
1
Only applies to telephone sets with at least two handsets
Section Package contents" on Page 23.
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
Mains power outlet
Summary of Contents for Splash 10x
Page 2: ...2 WAVE 10X Bedienungsanleitung 3 Operating Instructions 20 ...
Page 37: ...Notes 37 Notes ...
Page 38: ...Notes 38 Notes ...
Page 39: ...Notes 39 Notes ...