AUDIOLINE FF894-2, User Manual

Page: 5 / 31

3
INSTALLATION AUDIOLINE FF894-2
PARTS LIST
In the box you should find the following items:
#
2 Cordless Handsets
•
Line cord and adaptor plug
#
Base unit
•
User guide
#
2 NiMH battery (3.6V,600mA/H)
•
2 Belt clips
#
AC Adaptor
• •
Wall mount bracket
#
Charge pod and AC Adaptor
POSITIONING THE BASE UNIT
It is essential for best performance of the telephone system that the base unit be
positioned properly in your home or office.
Place the base unit close to a telephone network socket and a 240 volt mains outlet.
If the range of operation between the handset and the base unit is not satisfactory, try
repositioning the base unit, but:
#
Do not position the unit in direct sunlight, damp or high humidity locations.
#
Do not position the unit close to: electrical equipment such as TV’s, computers,
fridges, etc., or close to radiators, metal pipes or window frames.
BASE INSTALLATION
Connect the power supply cord to the rear of the base unit and plug into the 240 volt
mains outlet
.
The LED display on the base unit will count down from
06
to
00
as the system starts up.
The help menu is then heard, “HL” will display. When complete the display will show
“
- -
”.
You can press the
[REPEAT]
or
[SKIP]
buttons to replay the help menu or press the
[STOP
] button to stop the help menu.
If “Lo” shows in the display, back up batteries will need to be installed or replaced (see
page 4).
NOTE:
Before installing or replacing the batteries in the base unit, disconnect the
line cord from the telephone.