- Operation -
29
4.9
Assigning the three direct dial buttons
Your telephone has three direct dial buttons, M1, M2 and M3. The
maximum length for a number is 20 characters.
1.
Hold the required direct dial button pressed for 5 seconds. The
display shows the message
NR EINGABE
(ENTER NO).
2.
Enter the required telephone number using the number pad.
Incorrect entries can be deleted with the
button.
3.
Now press the required direct dial button again and the number will
be stored. The display will briefly show the message
M1
,
M2
or
M3
GESPEIC
(STORED).
4.10 Using the direct dial buttons
When you have assigned telephone numbers to the three direct dial
buttons, you can dial the three numbers easily.
Simply press the required direct dial button M1, M2 or M3 and the
number will be dialled directly. The last 10 digits of the number will be
shown in the display during the dialling process.
4.11 Checking the stored direct dial buttons
When you have assigned telephone numbers to the three direct dial
buttons, you can check which numbers you have stored at any time.
1. Press
the button four times until the message
ANS MEM
appears.
2.
Now select the required direct dial button by pressing the number
and the stored telephone number will be shown in the display for a
few seconds.
1 = M1
2 = M2
3 = M3
