3
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
#
#
#
#
Connect the line cord to the telephone socket.
#
#
#
#
Lift the handset and check for a dial tone.
CONNECTING THE HEADSET
CONNECTING THE HEADSET
CONNECTING THE HEADSET
CONNECTING THE HEADSET
Australian version includes a Headset.
New Zealand version, Headset is optional (see page 8 for contact details)
The headset must be connected to the socket at the rear of the telephone (item 5 on
page 2)
.
NOTE:
Australian users - The headset supplied should only be used with this
telephone.
WALL MOUNTING
WALL MOUNTING
WALL MOUNTING
WALL MOUNTING
The Audioline Casino can be wall mounted onto the standard wall plate by using the
wall bracket included or alternatively, by using the two screw holes located on the
rear of the unit.
Wall mounting without using supplied bracket
Wall mounting without using supplied bracket
Wall mounting without using supplied bracket
Wall mounting without using supplied bracket
#
#
#
#
Mark the position of the two holes 83 mm apart, one above the other.
#
Ensure there are no hidden cables, water pipes, etc., before drilling holes. Check
that the intended mounting point is within reach of a telephone socket.
#
#
#
#
Drill the holes.
#
#
#
#
Fit the screws (not supplied) to the wall, leaving 5 mm protruding (use wall plugs
if necessary, not supplied).
#
#
#
#
Place the telephone in position and locate the two holes on the base of the
telephone over the screws, then slide into place.
TO MAKE A CALL
TO MAKE A CALL
TO MAKE A CALL
TO MAKE A CALL
USING THE HANDSET
USING THE HANDSET
USING THE HANDSET
USING THE HANDSET
P
Lift the handset and wait for dial tone.
P
Dial the phone number.
P
Replace the handset to terminate the call.
USING THE HEADSET
USING THE HEADSET
USING THE HEADSET
USING THE HEADSET
P
Press and release the
[HEADSET]
button.
The headset indicator above the headset button will illuminate.
P
Dial the number you wish to call.
P
Press the
[HEADSET]
button again to terminate the call.
You can change between headset or handset use during a call, by pressing the
[HEADSET]
button and replacing the handset or by lifting the handset.
