20
Setting the telephone
/ Select
Boost
and press
OK
.
/
Select one of the following options and press
OK
:
Memory on
Select this setting to activate the boost function permanent-
ly. This allows you to set the earpiece volume up to level 10
/ refer to the note on page 3.
Auto reset
Select this setting to activate the boost function only for the
current call. This allows you to set the earpiece volume up
to level 10 / refer to the note on page 3.
Off
Select this setting to deactivate the amplification. You can
set the earpiece volume in 5 levels.
Setting the contrast
Press the menu key.
/ Select
HS setting
and press
OK
.
/ Select
LCD contrast
and press
OK
.
/
Select the desired contrast and press
OK
.
Setting the handset name
Press the menu key.
/ Select
HS setting
and press
OK
.
/ Select
Handset Name
and press
OK
.
Use
to delete characters then add new characters as
required (max. 10 characters).
Use
to switch to capitals and back again.
Press
OK
to finish.
Setting Auto Answer
Press the menu key.
/ Select
HS setting
and press
OK
.
/ Select
Auto Answer
and press
OK
.
/ Select
On
or
Off
and press
OK
.
☞
If Auto Answer is on an incoming call will immediately be taken when the
handset is taken from the base.
