In Case of Problems
46
10 In Case of Problems
Should problems arise with the telephone, please refer to the following information first.
In the case of claims under the terms of guarantee, contact your sales outlet.
Problems and solutions
Problems
Solutions
No connection to base station
possible
− Check that the handset has been registered on
the base station with the correct PIN code.
Page 39
No telephone calls possible
− The telephone line is not connected properly or
is defective. Only use the telephone connection
cable supplied.
− Test whether the telephone connection is in or-
der by using another telephone.
− The power adaptor plug is not plugged in or
there is a complete power failure.
− The rechargeable batteries are empty or defec-
tive.
− The handset is too far from the base station.
− The phone number has been barred (call bar-
ring)
Page 44
Connection is disturbed or cut off − The handset is too far from the base station.
− The base station is in an unsuitable location.
The system no longer responds
− Disconnect the power adapter plug briefly from
the power socket.
− Reset the default settings.
Page 47
The batteries are empty in a
short time
− The battery pack is defect.
− Place the handset in the base station properly.
Clean the contact surfaces on the handset and
base station with a soft, dry cloth.
− Place the handset in the base station for 14
hours.
The CLIP
1
function does not
work
− The CLIP (caller number display) function is an
optional service offered by telephone network
providers. Contact your network provider for
further information.
− The caller has suppressed the transmission of
their phone number.
1
CLIP: C
alling
L
ine
I
dentification
P
resentation
