Switching On and Off
Standby Mode
Auto Source Select
8: System Operations
Page 11
The 9000CDT should be switched on before the
amplification
stage in your system.
When switching
off
your system, turn
off
the
amplifier
stage before switching
off
the
9000CDT.
After initial power is on, the 9000CDT will be in ‘standby’ mode.
To use the 9000CDT, press the 'STANDBY' button to bring the 9000CDT out of
standby.
The power indicator LED will become brighter and the display will show the
'Audiolab' welcome screen as the unit enters the operational mode.
Source Select
When the 'Auto Source Select’ option is active, insert a USB drive when playing CD,
or load a CD when playing from USB HDD and the 9000CDT will automatically
offer
out a source select option.
You can immediately select the alternative source by press
on the remote
controller. If this is not required, 9000CDT will remain on the current playback
source if no confirmation is made within 5 seconds.
Alternative Display Options
The Audiolab 9000CDT has an intelligent and versatile display. You can access the
display options via the menu function.
Press the 'MENU' button on the remote controller to enter menu mode, or
long-press the 'SOURCE' button on the front panel of the device.
A 2 seconds press of the front panel source button brings up the option to change
input source. Continue pressing for a tota
l of 5
seconds to bring up the menu.
Navigate to 'Display Options' via the menu options (use the VOL+/- buttons on the
remote or front panel of the device for navigation. You can also use the and
buttons to navigate.)
Choose and con
fi
rm by
on the remote control or front panel of the device.
Audiolab
Display O
ff
Home
Contents Getting Started Controls and Functions Remote Handset
System Operations
Long press the ‘SELECT’ knob on the front panel for 3 seconds or use the source
▲
or
▼
buttons on the remote handset to select the different source options.
Summary of Contents for 9000CDT
Page 1: ...User Manual 9000CDT SELECT...
Page 17: ......
