Cleaning
We don’t recommend using any solvents or cleaners on Audioengine
amplifiers, cabinets, or speakers. Just wipe down with a soft, dry cloth.
Troubleshooting
7
8
No Sound
Power supply indicator
is not illuminated
• Recheck speaker wire connections from the amplifier to each speaker.
• Verify that the amplifier and your source components are turned on.
• Check that the AC wall outlet is on and working.
• Check that the cable from the power supply is connected to the N22 and the power
supply indicator is lit.
• Check that the volume/power knob on the front panel is turned on and not set to
minimum volume.
• Check that your audio sources (iPod, computer, etc) are turned on and not set to
minimum volume.
• Check that the cables from your audio sources are working and are properly connected.
• Check to see that the AC power cord is securely connected to the power supply and to
an AC power outlet.
• Check that the AC power outlet is supplying power.
Sound through
one speaker only
• Recheck all speaker wire connections on the speakers and the amplifier.
• Check that the cables from your audio sources to the amplifier are properly connected.
• If using a computer, verify that the audio output balance setting is centered.
• Check the polarity of the speaker wires on the amplifier and both speakers.
• Check the EQ or sound settings on your audio source.
• Decrease the volume of the input audio source and increase the volume of the
amplifier.
Lack of bass or
poor imaging
Sound Distorted
audioengine N22 setup guide
audioengine N22 setup guide
Other Features
Headphone Out - For headphone enthusiasts the N22 includes a high-
performance, low-noise headphone amplifier which works well with all
types of headphones. Even if you don't connect speakers to your N22 the
headphone amplifier will make your iPod or computer sound better
through headphones. Keep in mind that permanent hearing loss may
occur if earbuds or headphones are used at high volume so be sure to set
the volume to a safe level.
Line Out - The N22 includes a variable preamp output so you can connect
a subwoofer, external amplifier, or Audioengine wireless adapter and
control the volume of the line-out from the front panel.
USB Power - The USB power port allows you to charge and power your
iPod, iPhone, Audioengine wireless adapters or any other USB powered
product through the USB connector on the rear panel. Note that this is for
power only, not USB audio or data transfer.
For a complete list of product features and specifications go to:
www.audioengineusa.com
