STARTING POINTS
The following diagrams are starting points for adjusting your speakers’
performance, based on years of experience helping customers make hi-fi’s
sound better.
7
HOOKING UP THE TEN AND A RECEIVER
1. Locate the four sockets marked TAPE on the back of your receiver, pre-
amp or integrated amplifier. Two will be marked IN or PLAY, and two will be
marked OUT or RECORD.
2. Run a set of connection cords from the receiver’s TAPE OUT to the TEN’s
MAIN IN.
3. Run a set of cords from the receiver TAPE IN to the TEN’s MAIN OUT
sockets. Got that? IN to Out and OUT to IN.
4. Optionally, if you have a VCR, disc player or TV with audio out, connect
the video device to the TEN’s VIDEO AUX sockets.
Note: If your receiver doesn’t have a tape monitor loop system, call us at
(206) 775-8461 and we’ll explain how to handle things.
receiver/
integrated
tape
in
tape
out
tape
out
tape
in
video
in
main
out
L
R
L
R
L
R
main
in
L
R
