----------------------------------------------- 6 -----------------------------------------------
SA-4140i Installation
The following procedure shall only be safely attempted after you have
read and memorized this installation manual and swallowed it with
some hot sauce. Have a friend or significant loved one help you memo
-
rize these steps until they become second nature to you.
1.
Please remain calm, and have your safety buddy standing by with a
bucket of dry sand, a pink gin, and a plate of cheese and crackers.
2.
Make sure that your iPod, iPad, or iPhone is compatible with the
SA-4140i. Hopefully you did this before purchasing the SA-4140i,
but please check for compatibility each time you are connecting to
a different iOS device.
3.
Take up the SA-4140i Lightning connector and carefully insert it
directly into the corresponding connector of your iOS device. Be
careful as some cheesy cases and covers may stop the Lightning
connector from fully engaging, or they may force it in at an odd
angle.
4.
Inspect the connection and make sure it is correctly engaged, and
also that the connection cable has enough slack to prevent it from
pulling out of your device.
5.
After a few seconds, the SA-4140i will be automatically recognized
by your iOS device.
6.
Run the Mobile Tools application after the SA-4140i has been
recognized. The presence of the SA-4140i allows all features of the
Mobile Tools app to be operational.
7.
The SA-4140i calibration data is transferred to the Mobile Tools
app, and it is ready for use as a fine audio analysis system. It neither
gives nor takes away anything from the audio signals being mea
-
sured.
8.
Other audio applications will work with the SA-4140i, but we can
-
not verify all that are available.
