- 10 -
Dash Control (Purchased Separately)
Placement And Mounting
The dash control may be mounted under the dash using its own
bracket or through a custom hole in the dash. It should be
within reach of the driver and in a spot where the
LED is plainly visible.
Bracket Installation
The dash control mounts
with two screws, which
attach to the underside
of the dashboard.
Slide under the
dash and place
the dash control
in its mounting
position, mark
the two mount-
ing holes, drill pilot
holes, and secure with two screws.
Custom Installation
For that custom, finished look, the dash control can be flush mounted
directly on the dash-board (or anywhere else). Referencing the figure
above, disassemble the dash control from the mounting bracket. Start by
pushing the LED from its holder followed by removing the circuit board
and rotary control from the bracket. Drill a 9/32 hole in the dashboard for
the control along with a 1/8 hole for the lock tab and a 13/64 hole for the
LED holder. Reassemble the dash control components on the dashboard.
Dash Control Assembly
