background image

®

®

making good sound better

®

Six Channel Ultimate Performance 

Line Driver

    Let the Good Sounds Start!

 You have just purchased an ultimate-performance autosound product; 

the AudioControl Matrix Plus six channel line driver. The Matrix Plus 
allows you to utilize every last bit of performance and sound quality that 

you’ve always strived for from your vehicle’s sound system. So find a nice 

dry spot (we can’t recommend any near us), take a load off and spend a 
few moments reviewing this Enjoyment Manual. Here we go!

Features of the Matrix Plus:

• High signal voltage capability: 

 

13 volts peak output

• 24 dB of gain
• Six channels of input and output
• Balanced differential inputs
• Low-impedance outputs
• Optional Remote Level Control 

(ACR-1)

• PFM Subsonic filter
• Output level controls
• Ultra-low distortion, ultra-quiet 

operation

• Selectable ground isolation
• Optimum voltage indicator LED’s

FEATURES AND HIGHLIGHTS

High-Voltage Line Driver

The Matrix Plus is a pre-amp line driver that takes the input signal from 

up to three source units, increases it (up to 13 volts peak) and then delivers 
it downstream. No more low signal output voltages to allow noise into the 
rest of your performance car audio system.

Six Channel Inputs & Outputs

The Matrix Plus was designed for ultimate pre-amp flexibility.  With 

that in mind we have provided six channels for input and six for output!  

For even more flexibility, the Matrix Plus inputs can be linked internally 

whereby one input channel can feed one, two, or three output channels.

Balanced Inputs 

The Matrix Plus features balanced differential input circuit that rejects 

noise that radiates into the signal path between the source unit and your 

Matrix Plus.  Even better, this circuit uses standard RCA connectors.

Anti-Oscillation Output Circuitry

Driving long lengths of cable can present a nasty capacitive load to 

the source that has to drive them. This capacitance can cause instabilities, 
which can lead to oscillations, radio interference and excessive system 
hiss. The Matrix Plus’s low-impedance, high-current output circuitry easily 
handles long cable runs without their associated problems.

Output Voltage Indicators

Setting voltage levels for optimum signal-to-noise performance can be a 

real pain - especially when you have to get out the old digital voltmeter and 

find a way to make those probes stay put while you try to read the dancing 
LCD display. With the Matrix Plus’s voltage indicator LED’s, you can say 

good-bye to that headache. Just turn the Matrix Plus gain control until your 

favorite light flickers and you’re done!

- 2 -

Summary of Contents for Matrix Plus










Reviews: