3
1. Fuses 40A
– Replace the fuses only with the exact same style
and Ampere rating. Disconnect 12V power before changing or
inspecting the fuses.
2. Power Input Te12V
– This screw terminal connects to
the +12V battery binding post of the vehicle. Use quality insulated
wiring of the recommended wire gauge, such as wire gauge 2 or
thicker. Thinner wire may cause an overheating hazard due to the
large currents involved.
3. Remote Power Input Terminal
– This screw terminal connects
to the 12V remote trigger output of some head units. When the
head unit is turned on, then the LC-1.1500 amplifier will turn on.
Alternatively, you can use the GTO feature of the amplifier so it
will turn on when an audio signal is detected at the speaker-level
or line-level inputs.
4. Power Input Terminal Ground
– This screw terminal connects to
a good ground connection on the vehicle.
5. Speaker-Level Inputs
– The LC-1.1500 amplifier is supplied with
a standard 4-conductor plug that allows for easy installation and
removal. The speaker-level output from amplifiers and factory
installed radios can connect here, so the LC-1.1500 will receive
the audio signals and do its subwoofer thing. The left and right
audio signals are summed internally to produce a mono subwoof-
er signal. Make sure that you follow the plus and minus polarity
markings on the LC-1.1500 and match it to the polarity of the
speaker wiring. Do not use the RCA Line-level inputs if you are
using the speaker-level inputs.
Connection Panel
Features
1
2 3 4
5 6
7
8
