In-Dash
tm
FOUR.1
E
Owner’s Enjoyment Manual
No Sound
1. Check “Power” and remote turn on for
proper voltage. (Is power light on?)
2.Center the fader control.
3. Turn up “Input Gain” control.
4.Check ground connections.
5. Is the “Aux” button in the wrong
position?
Hiss
1. Turn down amp gains
2.Turn down amp gains
3. Turn down amp gains
4.Adjust source unit output
Distorting
1. Adjust equalization levels
Speakers
2.Adjust gain levels
3. Lower volume level of source unit
Whine
1. Check impedance of source grounds to
or Buzz amplifier grounds for resistance.
2.Change isolation selection of
grounding jumpers. See page 7, #13.
2kHz:
Our ears are most sensitive to the octave centered
at 2 KHz. Reducing it can prevent ear fatigue while boosting
it will add immediacy, presence and “attack”.
8kHz:
The 8Khz control is the sparkle in the musical
spectrum. What is sometimes perceived as ear piercing treble
is actually much lower than this in the high midrange areas.
The tips of women’s vocals, snare drums, some synthesizer,
higher brass and woodwinds are in this area.
Para-BASS:
One equalization control to cover all your
various bass needs...we don’t think so. The unique Para-BASS
control in the FOUR.1 is flexible enough to satisfy the bass
requirements of audiophiles or true “bassheads”.
Sweep:
Pick a frequency between 40 and 80 Hz. The
lowest of lows and the frequencies you feel more than hear
live in the 40Hz range. If you want tighter, kick in the pants
bass, you will probably head more into the 80Hz range. As
you change frequencies the Para-BASS control automatically
adjusts the bandwidth or “Q” to the optimum level.
TROUBLESHOOTING
13
Problem
Suggestions