®
Changing The PFM Modules
The first task in changing the PFM modules
is to remove the top chassis of the Architect.
To do this, first remove the 18 screws marked
in the figure above. Now let your wrist relax
for a few moments and survey the innards of
this beast. The PFM modules are located on the
circuit board that runs along the rear of the
Architect (see figure).
Use a small screwdriver to gently pry the
existing modules from their sockets taking care
not to bend the contact pins.
Now you can install the re-
placement modules. There is
NO POLARITY to these
modules so they can install in
either direction.
Now you can put the top
back onto the Architect and go
back to enjoying your music.
Changing The
PFM Modules
16
Changing the PFM Modules
WARNING: Unplug the Architect from AC
power before beginning. There are dangerous
voltages present inside.
Removing the Cover
Summary of Contents for Architect 500
Page 4: ......