background image

Quick Start Guide PN 914-019-0 Rev C

Specifications

All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously 

change our specifications, like our Pacific Northwest weather, although we are working on changing that as well.

The ACM-4.300 Amplifier

Power Output (RMS)   . . . . . . . . . . . . . . . . . . . . . . . . . . .4x50 Watts @ 4 Ohms

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4x75 Watts @ 2 Ohms

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2x150 Watts @ 4 Ohms Bridged

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz - 30 kHz

Total Harmonic Dist N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.01%

S/N Ratio   . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 dBa, Ref 50 Watts @ 4 Ohms

Power / Ground Wire Gauge  . . . . . . . . . . . . . . . . . . . Between 8 and 4 AWG

Fuse Rating  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 X 30 Amps

Crossover. . . . . . . . . .12dB/Octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass

Speaker-Level Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2x, 40V (400W) max

Line-Level Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . .2x, balanced RCA, 8V max

Weight   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.15 lbs

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.41

"

 W X 2.97

"

 D X 1.75

"

 H

©2018 AudioControl. All rights reserved.

Warranty

For details of the limited warranty for your ACM-4.300, please visit the follow-

ing page on our website:   http://www.audiocontrol.com/warranty

Please keep your receipt in a safe place.

AudioControl

22410 70th Avenue West, Mountlake Terrace, WA 98043 USA, 

Phone 425-775-8461, FAX 425-778-3166   

 

e-mail: [email protected]

Protection Codes

The various codes flashed by the Protection LED will help you diagnose any 

problems with your system.

Turn On Delay

KEY

LED ON
LED OFF

300 mS

Short Protec�on

DC Output Protec�on

Transformer Overtemp

Heatsink Overtemp

Overvoltage

Undervoltage

0

0.5

1.0

1.5

2.0

2.5

Time sec

3.0

3.5

4.0

Summary of Contents for ACM-4.300













Reviews: