AudioCodes RXV100, Deployment Manual, Page: 16 / 40

RXV100
Deployment Guide 16 Document #: LTRT-18192
2.1.2 Activating the RXV100
Two Windows accounts are by default built into the out-of-the-box RXV100:

‘Skype’ user account

‘Administrator’ account
Skype is the default account from which the MTR app runs. It’s limited to running the MTR app.
It’s the recommended account from which to run MTR . No administrator privileges are
available from this account. When the RXV100Hub boots, it automatically logs in to the ‘Skype’
account and automatically launches the MTR app. No user intervention is required.
Administrator is the standard Windows administrator account and provides system-wide
privileges. It’s password protected. The default password is RXV100MTR . For typical day-to-
day use, administrator credentials are not needed. The admin account is only used for device
management. The default account to run the MTR app is
Skype which will automatically be
logged in to when the RXV100Hub boots.
Note: It’s recommended to change the Administrator password after installation.
2.1.2.1 Using the Setup Wizard
When the RXV100Hub is turned on for the first time, appropriate MTR device account
credentials are required in order to sign in and the Windows Administrator password is needed
to switch to Administrator mode for further device pairing.

To use the Setup Wizard:
1. In the RXV100 Setup Wizard, select Language, Input Keyboard and Region.
2. Accept the license agreement and select Next .
3. Under 'Supported meeting mode', select Skype for Business and Microsoft Teams
(default) .
4. Enter the MTR device account credentials and select Next > Next > Next > Finish ; the
device is signed in and ready to use
Note: Updates to the app are automatically installed from the Microsoft Store during
nightly maintenance; this is the recommended method to get updates. For manual
update, see
MTR Application and Windows Upgrade .