AudioCodes MP-26 series, User Manual

Page: 84 / 464

User's Manual 84 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
8.2 Using the Automatic Dialer for Internet Connection
The Automatic Dialer feature allows the service provider to use one type of pre-configured
devices for all the following Internet connection types:

WAN Ethernet (DHCP, LT2P or PPPoE)

WAN xDSL (PPPoE)
In the Private Labeling process, the factory setting is burned with the parameters of the
different dialers. When powered-up at the customer site, the device first detects the
physical WAN type (xDSL or Ethernet) and then attempts the relevant WAN connection
methods. The indication for a successful result is connection (i.e., receipt of an IP address)
and a ping test.
This section describes the recommended process for using the Automatic Dialer.
8.2.1 Recommended Configuration
The recommended factory settings for the Automatic Dialer feature are shown below:
(auto_dialer_detect
( enabled (1))
( done (0))
( connection_type
(0
( type (DHCP))
( enabled (1))
( max_dialer_conn_time (20))
)
(1
( type (L2TP))
( enabled (1))
( server_ip (<Server Name or IP>))
( username (<User Name>))
( password (<Password>))
( max_dialer_conn_time (120))
)
(2
( type (PPPOE))
( enabled (1))
( username (<User Name>))
( password (<Password>))
( max_dialer_conn_time (120))
)
)
( auto_detect_retries (15))