AudioCodes MP-26 series, User Manual

Page: 244 / 464

User's Manual 244 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
Table 13-10: InternetGatewayDevice.Services.VoiceService.i.Capabilities.Codecs
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
Codec voip/codec/i/name Identifier of the type of codec.
EntryID voip/codec/i/ Unique identifier for each entry in the table.
PacketizationPeriod voip/codec/i/ptime Comma-separated list of supported
packetization periods (in milliseconds), or
continuous ranges of packetization periods.
Ranges are indicated as a hyphen-
separated pair of unsigned integers.
For example:

“20” indicates a single discrete value.

“10, 20, 30” indicates a set of discrete
values.

“5-40” indicates a continuous inclusive
range.

“5-10, 20, 30” indicates a continuous
range in addition to a set of discrete
values.
A range must only be indicated if all values
within the range are supported.
Note: Currently, only a single ptime per
codec is supported.
Table 13-11: InternetGatewayDevice.Services.VoiceService.i.VoiceProfile
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
DTMFMethod voip/out_of_band_dtmf Method by which DTMF digits must be
passed:

“InBand”

“RFC2833”

“SIPInfo
Enable - Enables or disables all lines in this profile, or
places it into a quiescent state:

“Disabled”

“Quiescent”

“Enabled”
On creation, a profile must be in the
Disabled state.
In the Quiescent state, in-progress sessions
remain intact, but no new sessions are
allowed. Support for the Quiescent state in
the device is optional. If this parameter is set
to “Quiescent” in the device that does not
support the Quiescent state, it must treat it
the same as the Disabled state.
Name
- String to easily identify the profile instance.
Note: Currently, this is not supported.