4
Configuring VoIP Parameters
To make VoIP calls, register with an ISP and obtain the account
and SIP proxy information.
To configure VoIP parameters:
1.
From the menu bar in the left pane, click
Voice Over IP
; the Voice Over
IP page opens in the right pane.
2.
Click the
Line Settings
tab, select check boxes only of lines that are
connected to telephones (clear those not connected), and click
Apply
.
3.
Click the
Action
icon corresponding to your FXS telephone lines, and
then in the Line Settings page, configure the parameters with values
provided by your ISP.
4.
Click the
Signaling Protocol
tab and then select the 'Use SIP Proxy' check
box. In the 'Proxy IP Address or Host Name' field, enter the ISP's proxy IP
address or host name as provided by your ISP. Click
OK
to complete the
VoIP configuration.
To verify successful registration to the Proxy server, ensure that
the
PHONE
LEDs flash green, or in the
Voice over IP
tab (System
Monitoring menu), the entry 'SIP Registration' displays
"Registered" for the configured FXS lines.
5.
Pick up the phone receiver and listen for the dial tone; you're now ready
to make an outgoing VoIP call.
Notice Information
This Quick Guide describes the quick setup for MP-202 Telephone Adapter model.
Information contained in this document is believed to be accurate and reliable at the time of
printing. However, due to ongoing product improvements and revisions, AudioCodes cannot
guarantee accuracy of printed material after the Date Published nor can it accept
responsibility for errors or omissions. Updates to this document and other documents as well
as software updates can be viewed by registered customers on AudioCodes' Web site at
www.audiocodes.com/downloads
.
© Copyright 2016 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: June-14-2016 Document #: LTRT-18722
International Headquarters
1 Hayarden Street, Airport City, Lod 7019900
P.O. Box 255, Ben Gurion Airport, Israel, 7019900
Tel: +972-3-976-4000 Fax: +972-3-976-4040
AudioCodes MP-202 FXS Telephone Adapter
MP-202
Quick Installation Guide