AudioCodes mediapack MP-500, User Manual

Page: 65 / 574

Version 5.8 65 October 2009
SIP User's Manual 3. Web-Based Management
¾
To configure QoS:
1. Open the 'QoS Settings' page ( Configuration tab > Network Settings menu > QoS
Settings page item).
Figure 3-37: QoS Settings Page
2. Configure the QoS parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 237 .
3.4.2 Media Settings
The Media Settings menu allows you to configure the device's channel parameters. This
menu contains the following items:
„ Voice Settings (refer to ''Configuring the Voice Settings'' on page 65 )
„ Fax/Modem/CID Settings (refer to ''Configuring the Fax/Modem/CID Settings'' on page
66 )
„ RTP/RTCP Settings (refer to ''Configuring the RTP/RTCP Settings'' on page 67 )
„ General Media Settings (refer to ''Configuring the General Media Settings'' on page 68 )
„ Hook-Flash Settings (refer to Configuring the Hook-Flash Settings on page 69 )
„ Media Security (refer to ''Configuring Media Security'' on page 69 )
Notes:
•
Channel parameters can be modified on-the-fly. Changes take effect from
the next call.
•
Some channel parameters can be configured per endpoint or call routing,
using profiles (refer to ''Configuring the Profile Definitions'' on page
160 ).