8
|
P a g e
ASSIGNING AN IP ADDRESS THROUGH THE VOICE MENU
You can change the IP address through the device's interactive voice response (IVR) menu, using touch-tone
dialing (DTMF tones) on a standard telephone that is connected to one of the device's FXS ports:
1.
Connect a telephone to one of the device's FXS ports.
2.
Lift the handset off the hook, and then dial
***12345
(three stars followed by the digits 1, 2, 3, 4, and
5). Note that you may hear a fast-busy dial tone when pressing the * key.
3.
When you hear the configuration menu voice prompt, continue with the next step.
4.
To change the IP address:
a.
Press
1
followed by the number key (
#
); the current IP address of the device is played.
b.
Press the
#
key.
c.
Dial the new IP address, using the
*
key to denote the dots between digits (e.g., 192*168*0*4),
and then press
#
to finish.
d.
Press
1
to save.
5.
To change the subnet mask:
a.
Press
2
followed by the
#
key; the current subnet mask of the device is played.
b.
Press the
#
key.
c.
Dial the new subnet mask (e.g., 255*255*0*0), and then press
#
to finish.
d.
Press
1
to save.
6.
To change the Default Gateway IP address:
a.
Press
3
followed by the
#
key; the current Default Gateway address is played.
b.
Press the
#
key.
c.
Dial the new Default Gateway address (e.g., 192*168*0*1), and then press
#
to finish.
d.
Press
1
to save.
7.
Hang up (on-hook) the telephone's handset.
