CHAPTER 5 Cabling the Device
Mediant 800 Gateway & E-SBC | Hardware Installation Manual
Figure 5-16: Cabling PRI Ports for PSTN Fallback
It doesn't matter which PRI port you use to connect to a Tel entity (i.e., PBX or PSTN).
Connecting to a Computer for Serial Communication
The device provides an RS-232 serial interface port on its front panel for serial communication with
a PC.
Cable specifications:
■
Connector Type: RJ-45
■
Cable: RJ-45 to DB-9 cable adaptor
➢
To connect the device's serial interface to a computer:
1.
Connect the RJ-45 cable connector to the device's serial port, labeled CONSOLE.
2.
Connect the other end of the cable to the COM1 or COM2 RS-232 communication port on your
PC.
- 25 -
