AudioCodes Mediant 500L MSBR, Configuration Manual

Page: 58 / 74

Mediant MSBRs 58 Document #: LTRT-31828
Security Setup
4. In the 'Internet address' field, enter the VPN IP address (typically, the device's WAN
interface).
5. In the 'Destination name' field, enter the destination name, which will later become the
dialer's name in the Network Connection window.
6. Click Next .
Figure 8-4: L2TP Username and Password
7.
Enter the user name and password that was previously configured on the device, and
then click Create .
8. Open the Network Connections window:
a. Press the R key combination; the Run window appears:
Figure 8-5: Run Window
b. In the 'Open' field, enter "ncpa.cpl", and then click OK .